PRODUCTS

TOSOH Product

[TOSOH 고온 GPC] EcoSEC HLC-8321HT/GPC

Feature
주요특징

Tosoh High Temperature GPC System

HLC-8321GPC/HT

HLC-8321GPC/HT는 폴리올레핀, PPS 등과 같은 다양한 중합체에 적용되는 전용 고온 GPC 시스템입니다.

TOSOH 고온 GPC 시스템의 우수한 유틸리티, 안전 및 환경 친화성과 "GPC Workstation 8321GPC-WS" 소프트웨어의 조합으로 고품질의 GPC 측정이 가능합니다.



최대 220ºC 까지 분석

 최대 220ºC까지 제어할 수 있습니다. 폴리에틸렌과 폴리프로필렌 외에 고온에서만 유기용매에 용해되는 PPS와 같은 폴리머에 적용됩니다.


안정적인 베이스라인(Baseline)

 이중 경로 및 이중 유량 시스템으로 구성된 굴절률검출기(RI detector)는 광학블록 온도제어시스템 최적화를 통해 안정성을 향상시켰습니다.


빠른 안정화(High-speed Start-up)

 RI 검출기 전용 히터를 내장하여 고속 안정화가 가능합니다. GPC 측정은 145ºC에서 ODCB 용매 조건 하에서 3시간 안에 시작할 수 있습니다.



완벽한 안전 시스템

 TOSOH GPC 시스템은 안전을 고려하여 컬럼 오븐 및 오토샘플러에 자동 잠금 도어를 장착하였습니다. 오토샘플러에는 국소 환기를 위한 덕트도 장착되어 있습니다. 


쉬운 조작(Easy Operation)

 GPC Workstation '8321GPC-WS'를 사용하여 웜업, 분석, 종료 등을 통해 손쉽게 시스템 조작이 가능합니다.
 하드웨어의 조작 패널을 사용하여 주 장치를 독립적으로 제어할 수도 있습니다.
 레포트는 소프트웨어의 레포트/레이아웃 시스템으로 Customized 할 수 있습니다.



세계 표준

FDA 21 CFR Part 11 준수*
(* 사용자 ID 및 암호를 사용한 인증, 완료 시 로그아웃, 소프트웨어 유효성 검사 등 )

Application
어플리케이션



Specification
제품사양

SPECIFICATIONDESCRIPTION
 Solvent Stocker
 Bottle 3L bottle × 1
 Method Hot-air circulation, PID control
 Temperature 40ºC (5ºC higher than room temperature)
 Safety Systems Monitoring by temperature sensor – embedded software,
  Thermal fuse (70ºC) – circuit, Liquid drain
 De-gas Unit
 Method Vacuum type
 Purge System
 Method Syringe type
 Pump Oven
 Method Hot-air circulation
 Temperature 40 - 50ºC
  (1ºC step, 10ºC higher than room temperature)
 Safety Systems Monitoring by temperature sensor – embedded software,
  Thermal fuse (70ºC) – circuit, Gas sensor, Door sensor, Liquid drain
 Pump
 Flow Mode Parallel (Quick return)
 Flow Rate Range 0.10 – 2.00 mL/min (0.01mL step)
  The reference flow rate is set in the ratio[1, 1/2, 1/4]
  with the sample flow rate
 Accuracy ± 2% or ± 0.005mL/min whichever greater
  (H2O, 1 MPa or more, 1.2mL/min or less)
 Precision ± 0.2% or ± 0.001 mL/min whichever greater
  (H2O, 1MPa or more, 1.2mL/min or less)
 Pressure Setting Range 0.0 – 15.0MPa (0.1MPa step)
 Drain Valve Electroactuation
 Autosampler
 Measuring Method Loop measurement
 Sample Loop 300µL (500 µL loop is attached, 10 – 500µL loop is available)
 Reproducibility CV 0.5 %
 Number of Vials 24
 Vial Volume 10 mL
 Temperature Aluminum block heating, PID control (sample table)
 Control Method 
 Range 40 -220ºC
  (1ºC step, 10ºC higher than room temperature)
 Safety Systems Monitoring by temperature sensor – embedded software,
  Thermostat (250ºC) – circuit, Door lock during table moving,
  Sample cup sensor, Needle crash sensor,
  Duct for local ventilation
 Valve Box (temperature control for injection valve)
 Method Aluminum block heating, PID control
 Range 40 - 220ºC
  (1ºC step, 10ºC higher than room temperature)
 Maximum Pressure 15 MPa
 Safety Systems Monitoring by temperature sensor – embedded software,
  Thermostat (250ºC) – circuit, Gas sensor
 Column Oven
 Method Hot-air circulation, PID control
 Range 40 - 220ºC
  (1ºC step, 10ºC higher than room temperature)
 Column Capacity 30cm columns × 8, guardcolumn × 1, Inlinefilter × 1
 Safety Systems Monitoring by temperature sensor – embedded software,
  Thermostat (250ºC) – circuit, Gas sensors (2) ,
  Door lock at high temperature, Door sensor, Liquid drain
 RI Detector
 Method Bryce type double path and dual flow
 Light Source Tungsten lamp
 Flow Cell Made of quartz glass, volume; 10µL,
  Maximum pressure; 0.3MPa
 Drift 3 × 10-7 RIU/h (ODCB, 1.0 mL/min, 145ºC)
 Noise 1.5 × 10-8 RIU (ODCB, 1.0 mL/min, 145ºC, response; 3 s)
 Temperature Range 40 - 220ºC
  (1ºC step, 10ºC higher than room temperature)
 Safety Systems Monitoring by temperature sensor – embedded software,
  Thermostat (250ºC) - circuit
 Drain Stocker
 Bottle 3L bottle × 1
 I/O Terminals
 PC Communication USB
 Power Supply Ratings
 Voltage AC 100 – 240V
 Frequency 50/60Hz
 Power consumption 1500VA
 Dimensions and Weight
 Outside Dimensions 1000 (W) × 650 (H) × 500 (D) mm (excluding projections)
 Weight 125kg


목록보기